Welcome to ECVERY
Heat Pipe For Solar Water Heater
Heat Pipe For Solar Water Heater
Supplier Info
[China Supplier]
Contact Person : Ms. Gao Cindy
Tel : 86-573-87832229
Fax : 86-573-87832227
Product Detail
Heat pipe vacuum tube 1)High absorbance 2)Resist the frozen weather 3)Long life

Heat Pipe For Solar Water Heater  

Feature:

1) High heat effectiveness: higher than all glass solar vacuum tube by 15%

2) heat pipes    conduction: successfully prevents the defects of tube breakage and low power output caused by water fouling and deposits or dust and sand

3) Prevents the tube from being easily broken caused by volume expansion when water freezes in the frigid season

4) Low thermal capacity makes the tube start up quickly

5) Energy output within only 2 minutes of sunshine

6) Insulation temperature can reach 250degrees, average heat efficiency can still be more than 50%; even under 50degrees

7) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube has higher heat output in cloudy weather and in moist areas, especially in winter

8) Solar collecting plate is sealed inside a high quality borosilicate glass tube with 5 x 10-3Pa of vacuum, to stop corrosion; even in moist conditions

 

 

Metal-glass evacuated solar collector tube consists of a triple target coating tube and aflat or curved aluminum plate inside attached to a copper heat pipe.

 

 

Technical Parameter:

Structure 

All-glass double-tube co-axial structure

Glass material

High borosilicate 3.3 glass

External pipe diameter and thickness

Φ=47±0.7mm  &=1.6mm  Φ=58±0.7mm  &=1.6mm

Φ=70±0.7mm  &=2.0mm

Internal pipe diameter and thickness

Φ=37±0.7mm  &=1.6mm  Φ=47±0.7mm  &=1.6mm

Φ=58±0.7mm  &=1.6mm

Pipe length

500mm 850mm 1200mm 1500mm 1600mm 1700mm 1800mm 1900mm 2000mm  2100mm

Absorptive coating property

Structure

Cu/SS-ALN(H)/SS-ALN(L)/ALN

Sediment method

3 target magnetron sputtering plating

Specific absorption

0.93~0.96(AM1.5)

Emission ratio

0.04~0.06(80°C±5°C)

Vacuum tightness

5.0×10-3Pa

Idle sunning property parameters

260~300 m².°C /KW

Solar irradiation for obtaining a preset water temperature

H≤4.7MJ/ m²(Φ58)

H=3.7~4.2MJ/ m²

H≤3.7MJ/ m²(Φ47)

H=2.9~3.2MJ/ m²

Average heat loss coefficient

0.4~0.6W/(m².°C)

Resistant Hail

25mm

Life aged

15 years

Heat Pipe For Solar Water Heater

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.