Welcome to ECVERY
0.15~1050MHz Spectrum Analyzer
0.15~1050MHz Spectrum Analyzer
Supplier Info
[China Supplier]
Contact Person : Ms. Ho Tina
Tel : 086-755-86021384
Fax : 086-755-86021347
Product Detail
Test cable TV levels and frequency response Compact and Easy to be carry a low cost,high performance digital synthesized

AT6000 Series(AT 6011-AT6010)

AT6000 Series Spectrum Analyzer is a low cost,high performance digital synthesized RF measurement instrument with Tracking Generator and frequency upto 1GHz.AT6000 Swries spectrum analyzer have exceed 1GHz frequency(0.15~1050MHz)50MHz step frequency and fine adjust to the center frequency;compose the conenient frequency-comain test.AT6011 have the tracking signal generator.This model is the same with pre-research test.It uses VCO phase locked technique.It has rugged casing and it has easy to control operating panel.

The Spectrum Analyzer can carry out good inspection of the faults of cable system and wireless system including remote control,cordless phones,cable TV and communication equipments,as well as good comparison and analysis of frequency of signals

Features

Compact and Easy to be carry

Frequency range:(15~1050MHz)

16-bit half numercial display (center frequency,0.01MHz resolvability)

-100~+13dBm amplitude range,20KHz,400KHz

Intermediate frequency and 4KHz video filter

Phase Locked loop technique

Excellent Noise floor performance

Tracking signal generator

Applications

Test cable TV levels and frequency response

Educational Training Institutions

Test master antenna TV systems

Measure communications transmitter spurious radiation

Locate sources of EMI

Measure unwanted RF radiation

Specifications

Frequency range:0.15KHz to 1050 MHz

CF adjusts range:0~1050MHz

Resolution of frequency display:10KHz

RBW:400KHz and 20KHz

Video filter bandwidth:4KHz

Average noise level:-90dBm(20 KHz bandwidth)

Amplitude range:-100dBm to +10dBm

Amplitude Frequency Response:10dB Attenuation,Zero Step

Sweep rate:40Hz

Reference level:-30dBm to +10dB

Frequency generator:TCXO,DDS

Input attenuator accuracy: ±1dB/10dB

Signal input connector:N type

Stability: ±5ppm/year

Aging : ±10kHz

Display CRT:8X10DIV

Third order intermod:-90dBc(two signals>3MHz apart)

Scan width:100kHz/div~100MHz/div,1-2-5 steps and 0 steps

Log scale fidelity: ±2dB(CF:500MHz 10 dBm attn zero scan RBW:400kHz)500MHz

Stability : ±10ppm/year

Aging : ±2ppm/year

Sweep Width Range: ±zero steps&1-1000MHz(1-2-5steps)

Sweep Width Accuracy: ±10%

Video filter bandwidth:4KHz

Sweep time:20mS

Display range:80dB(10dB/div)

Input attenuator:0~40dBm(4*10dB)

Accuracy:<or=±2dB/10dB

AT6011 Tracking Generator Specification

Output Frequency Range :0.15MHz to 1050MHz

Output Power Level:-50dBm to +0dBm(in 10dB steps & vary)

Output Attenuator Accuracy: ±2dB

Output Flatness(150KHz to 1050MHz): ±1.5dB

Spurious Outputs:Harmonic Spurs &Non harmonicSpurs

0.15~1050MHz Spectrum Analyzer

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.