can test the signal with the range 0.15 ~ 3000MHz can carry out good inspection of the faults of cable system

AT5030 Spectrum Analyzer is a low cost, high performance digital synthesized and frequency-scanning and super heterodyne RF measurement instrument with frequency upto 3 GHz. These advanced features tunes within the frequency range by electro scanning and the frequency ponderance of its spectrum will be sampled according to the time. Therefore, the scanning and tuning spectrum analyzer can display the cycle signal and random signal.

In AT5030, there are kinescope and separately-packaged equipment, which are exported. AT5030 can test the signal with the range 0.15 ~ 3000MHz. And the center frequency can be adjusted through slightly tuning and roughly, which can form a sample measurement of frequency, with 100KHz/case ~ 100MHz/case added. A 4-and-half digits display can be chosen as center frequency or marked frequency reading.

The Spectrum Analyzer AT5030 can carry out good inspection of the faults of cable system and wireless system including remote control, cordless phones, cable TV and communication equipments, as well as good comparison and analysis of frequency of signals.

Features

Compact and Easy to be carry

Frequency range : 0.15~3000MHz (detailed ranges: 0.15  1000 MHz; 1000MHz  2000MHz; 2000MHz  3000MHz)

4 and half Digital display (center frequency, 0.1MHz resolvability)

-100~+13dbm amplitude range, 20KHz, 400KHz

4 KHz video filter.

Excellent Noise floor performance

Applications

Test cable TV levels and frequency response

Educational Training Institutions

Test master antenna TV systems

Measure communications transmitter spurious radiation

Locate sources of EMI

Measure unwanted RF radiation

Technical Specifications

Frequency range:0.15 3000MHz(detailes ranges:0.15 1000MHz;1000MHz 2000MHz; 2000MHz 3000MHz)

Display accuracy of center frequency: ±2% x spectrum width + 5 x 10-3* center frequency 100KHz

Mark accuracy: ±0.1% frequency width +100KHz

Frequency display resolution:100KHz(4 and a half LED)

Scanning-frequency width:100KHz/case~100MHz/case and level1.2.5.0Hz/case(0 scanning)

Accuracy : ±10%

Frequency stability:better than 150KHz/h

Middle-frequency(-3dB):20KHz;400KHz,video filter(pass);4KHz

Scanning Velocity:43Hz

Scope

Range -100~+13dBm

Screen display range:80dB(10dB/case)

Reference level of electricity:-27dBm~+13dBm

Average noise level of electricity:-90dBm(bandwidth 20KHz)

Tortiontwice ,three times wave<-55dBc

Sensitivity :better than 90dBm

Real Scale: ±2dB

Digital display Spectrum Analyzer AT5030