Ideal for loading molds that require secure storage with easy access.

mold rack Introduction Mold, also known as mold rack shelf, the main storage of a variety of mold materials, according to the requirement set out into a light layer of mold shelves and shelves of heavy mold. Top shelf can be configured to move the hoist vehicles to facilitate lifting the mold.

Mold production technology shelf Light mold steel shelves with 100 × 50mmC as a special column, the column of high quality disposable Q235 strip rolling mill is made by. Drawer generally rectangular plate frame bending pipe and 4.0 parts welded steel upper berth. Guide slot formed by bending steel plate 4.0. Top, bottom, connected by beams, top of the shop roof, the roof can storage. Heavy mold with heavy-duty shelves shelves as the overall framework for on-chip installed in the shelf column-oriented track, drawer tray. General Column will not less than 90 × 70 column.

Die Rack column by the column Gala Rods films, will guide slot chip installed in the column above the upper and lower beams connected with a fixed, and then the drawer guide plate installed in the tank, having a good limit pin and a guide rail, and finally laying the roof. If no line hanging within the plant, can also be set up days in the shelf above the columns and crane rail, and can be manual or electric hoist to install, space-orbit with no less than 100 × 50 hold welding beams. After the whole embryo parts do black oil removal by shot blasting, rust removal, spray last a surface treatment, can be packaged after the completion of delivery.

the characteristics of mold rack 1, assembled mainly from the column disc, guide slot, drawer layer, rod, pin, etc. Using bolt connections, structural stability, safety and reliability, use of general row. 2 drawer set mainly by the slide, drawer tray composition. Drawer set by the bending moment is increased to the framework of welded parts and steel composition. Before and after each slide up and down by two bearings fixed, rolling freely in tank-oriented, small resistance, you can easily pull out the drawer. 3, die plate rack drawer for security reasons, the design of the pin and limit sales to ensure that when the drawer set out to ensure the safety of. 4, a light layer of mold shelf contained in the 200 ~ 800kg / layer. Layer of heavy-duty drawer rack set in: 800 ~ 1500kg / layer. 5, mold shelf covers an area of less significant level, classification details, easy to operate. 6, mold shelf in the cargo space can also be rack drawer tray to do the beam, with the cost savings, the structure more stable.

Mould rack