SHS/RHS Steel Tubes 1.Yield:Min195Mpa 2.Tensile Strength:Min315Mpa 3.Elongation:Min20% 4.Certification:ISO9001-2008
Square Hollow Section, Rectangle Hollow Section
Keywords:Square Hollow Section, SHS, Square Box, Painted, Galvenised, ERW, Black, Mild Steel
Keywords:Specialising in Steel, Cut to Length, Round, Square, Hollow, Rectangular, Rectangular Hollow Sections, RHS
Steel Grade: Q235, Q345, S235JR, S275JR, SS4007
Standard: GB/T 6728-2002,ASTM A500,ASTM A53,GB700-88, EN10219, JIS G3101,JIS G3466, BS EN 10219:199Surface Finish: hot dipped galvanized, electro galvanized, blackNote: A: with, T: wall thicknessSHS (Square Hollow Section) Size range Table 1.
RHS(Rectangular Hollow Section)Size range Table 1.Tolerances:
Length | +20MM/-0 MM |
Wall Thickness | +/- 5% |
Weight | +/- 3% |
Note: Pre-galvanized square / rectangular hollow section with OD 15mm-100mm and thickness 0.7mm-2.5mm are also available. Application:Furniture industries & domestic applications, bus body, fencing etc. Sizes other than mentioned above can also be produced upon specific requirements.
HSS (Hollow Structural Steel)
Cold rolling - to 8” x 8”, 12” x 4” (easy way), 8” x 6” (hard way)
Draw bending - to 4” x 4” (easy and hard way)
Cold bending - to 8” x 8”
Mill Test Certificate: EN 10204/3.1B Third party inspection: SGS, BV, Lloyds etc.
Carbon steel pipes customized square tube
Name | Size | Thickness | Name | Size | Thickness |
Square Tube | 30×30 | 2.3-3.0 | Rectangular Tube | 100×50 | 3.0-8.0 |
40×40 | 2.0-4.0 | 100×60 | 3.0-8.0 | ||
50×50 | 2.0-5.0 | 100×80 | 3.0-8.0 | ||
60×60 | 3.0-6.0 | 120×60 | 3.0-8.0 | ||
80×80 | 3.0-8.0 | 120×80 | 4.0-8.0 | ||
90×90 | 3.0-8.0 | 120×100 | 4.0-8.0 | ||
100×00 | 4.0-10.0 | 150×100 | 4.0-8.0 | ||
120×120 | 4.0-12.5 | 200×100 | 5.0-12.5 | ||
140×140 | 4.0-12.5 | 200×120 | 5.0-12.5 | ||
150×150 | 4.0-12.5 | 200×150 | 5.0-12.5 | ||
180×180 | 4.0-12.5 | 250×100 | 5.0-12.5 | ||
200×200 | 4.0-12.5 | 250×150 | 5.0-12.5 | ||
250×250 | 5.0-12.5 | 300×100 | 5.0-12.5 | ||
300×300 | 5.0-12.5 | 300×200 | 5.0-12.5 | ||
320×320 | 6.0-17.5 | 400×200 | 5.0-12.5 | ||
350×350 | 6.0-17.5 | 350×300 | 6.0-17.5 | ||
380×380 | 8.0-17.5 | 400×300 | 6.0-17.5 | ||
400×400 | 8.0-20.0 | 450×250 | 8.0-17.5 | ||
450×450 | 8.0-20.0 | 500×300 | 8.0-20.0 | ||
480×480 | 8.0-20.0 | 500×400 | 9.0-20.0 | ||
500×500 | 8.0-20.0 | 600×200 | 9.0-20.0 |
square pipes and rectangular pipes