Hot rolled steel round bar SAE8620
Quality: AISI8620 Standard Performed: ASTM A29/A29M-04
1.Grade:SAE8620 50CrMo4 SNCM220 805M20 4150 4140 EN24 4340
Size: 12mm-300mm
2.Chemical composition:
Grade | C | Si | Mn | P | S | Cr | Ni | Mo |
8620 | 0.18-0.23 | 0.15-0.35 | 0.70-0.90 | Max 0.035 | Max 0.035 | 0.40-0.60 | 0.40-0.70 | 0.15-0.25 |
3.Mechanical Property:
Grade:ASTM A29 SAE 8620 SNCM220
Hardness:197HB
Tensile strength:980(100)MPA
Yield strength: 785(180)MPA
elogation:9% Reduction of area:40% AKV(impact value):47J
4. Size Tolerance:
Length tolerance: +100mm/-0mm
Side length tolerance: +/-2mm
Straightness:Max 6mm/m
5. Quality Contation
Both end of each bar must be cut.
Ladle furnanced and vacuum de-gassed
Show heat No. on each bar
Surface condition the surface of the hot rolled square bar shall befree cracks, scar and wrinkles that affect the use of the billets. In case there is the above-mentioned defect, it shall be remove.
The mill test certificate shall show the chemical composition, and it is guaranteed that the chemical composition shall be within the limit stipulated in the contract.
( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v1/688421664_1/Aisi_4130_4140_4150_alloy_round_bar.jpg' , 'http://i00.i.aliimg.com/photo/v1/688421664_2/Aisi_4130_4140_4150_alloy_round_bar.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Aisi 4130 4140 4150 alloy round bar