Ads by Google
Steel floor decking sheet
specification are stated as below:
Thickness:0.7-1.1mm
Zinc coated: 80g-150g
Length: as customer's required
Cover width: 600mm
Wave Hight: 48mm
Wave Length: 200mm
Installation: Welded into the purlin and shearer bolt needed
Advantages are stated as below:
1)Excellent waterproofness 2)High in hardness 3)Beautiful and durable 4)Ligh in weight 5)Strong erosion resistance
6)Edging trim is available.
Brief introduction:
1) Floor decking steel sheet is roll formed by the roll forming machine,maiinly using galvanized steel ,at thickness 0.7-1.2mm
2) Simple shape with high rib and high strength
3) Put the panel above the welded wire net,fill cement between them
4) This panel is usually used as the floor of high buildings,it can save steel mound and can also save the weight,in the same loading capacity,use this panel,and save
the steel quantity,and thus save cost
Installation
Composite floor slab construction sequence:
1) By welding procedure,the steel decklng floor sheets is fusion welded on the steel beam.
2) The connections of steel floor decking sheet is fixed by clamp
3) Nails is fixed on the composite wind beam by welding gun
4) Department will a gun fixation nail scissors
5) Colligate steelfabric as the design requirement
6) Bolt pouring
PS: container information:
20’CONTAINER SPECIFICATION | |||||
Interior Dimension | Door Opening: | Tare Weight | Payload | Cubic Capacity | Average Loadability |
L: 5,898mm | W: 2,340mm |
2,200kg
|
24,800kg
| 33.0 cbm | 28.0 cbm |
W: 2,350mm | H: 2,280mm | ||||
H: 2,393mm | |||||
About our company:
Tianjin JinGangZhongJie Steel Structure Engineering Co., LTD is professional manufacturer of metalforming.Our main products are color steel plate and corrugated steel sheets,color steel sandwich panels (polyurethane, EPS,Rockwool, sandwich panels),Floor decking and accessories etc. It lies in BINHAI New Area in Tianjin, and closely toTianjin Port The geographical position is superior for export.
galvanized/alu-zinc steel floor decking sheet