17HM3630 Nema 17 mini dc stepper motor with driver is a brushless, synchronous electris motor that can divide a full rotation into a large number of steps. The motor's position can be controlled precisely, without any feedback mechanism.
17HM3630 Nema 17 mini dc stepper motor with driver Parameters:
Rotor inertia (g.cm2)
80 degree Max
-20 ~ +50 degree
100MΩ Min 500 V DC
500V AC 1minute
Shaft Radial Play
Shaft Axial Play
1, Low noise and runs smoothly
2, High performance, low price
3, Provides 12/8 kinds of micro step selection,upmost micro step can be set to 200 x,enhance resolution
4, Special control circuit, greatly reduce noise, increase steadiness
5, Upmost response frequence amounts to 200Kpps
6, Once the pulse stops for 100ms,the phase current will automatically cut by half
7, Bipolar constant current chopper control
8, Photocoupler isolated input/output
9, Drive current range from 0.1A/phase~4.0A/phase
10, can match two phase hybrid step motors whose rated current under 4.0A 11, Single power input, voltage range from DC12-40V
12, Protection circuit, Overheat protection, Over current, under voltage protection
13,Small in size ,compact driver, its dimension is only 25x136x92mm3.
14, Typical application Carve machine,laser labeling machine,laser internal carve machine.
Please contact with us for more detailed technical information.
We can design according to clients' requirements.
17HM3630 Nema 17 mini dc stepper motor with driver