Introduction
MST.B visual mini-size pulse vacuum sterilizer is suitable for sterilizing unwrapped, wrapped, dressing package, rubber, implantable instrument, porous item (dressing), hollow instrument (high and low speed hand-piece) which can withstand high temperature and pressure in the places including oral department, ophthalmology, operation room and lab.
Technical advantage
1.High performance special controller based on embedded microprocessor is used by the system control, its function is power and process control is accurate.
2.6 ten thousand 5 thousand color LCD display is adopted, with beautiful and clear picture, touch screen button, easy to operate.
3.Visual isolated purification tank and polluted tank system which avoid distilled water disadvantage occurs during water-cycle, easy to clean and avoid heat generated.
4.Advanced fuzzy control heating technology is used, with heating up quickly, temperature-control accurate and energy-saving effectively.
5.International leading automatic switch structure adopted ensures personal safety and labor intensity reduced.
6.Independent quick steam generator is adopted, and the whole process finishes within 30mins.
7.The pot wall silica gel heating membrane used can arrive at preheating temperature quickly and make sure of the good effect of drying.
8.Equipped with built-in steam-water separator can effectively avoid wet pack, reinforce drying effect and prolong service life of vacuum pump.
9.Built-in vacuum pump with high quality is imported, pulse vacuum 1-6 times and vacuum degree can arrives at -0.09 MPa(-0.9Bar), to ensure effective removal of the air inside dressing, sterilizing bag and dental hand-piece so as to get the optimum steam saturated state.
10.Perfect maintenance information indicating function.
11.Cycle countdown function.
12.Perfect fault check system, the fault information is shown on LCD display.
13.The beep will sound once the sterilization cycle completes.
Safety protective device
Over-temperature protection: mechanical and electronic double over-temperature protective device adopted will cut off heater power supply once over-temperature occurs.
Over-pressure protection: double over-pressure protective device can release pressure quickly to ensure personal and equipment safety once the pressure exceeds desired value.
Circuit safety protection: direct current control loop is equipped with over-pressure and overload protector, exchange current main loop is equipped with short circuit and leakage protector.
Safety interlock door: electric lock adopted to ensure the sterilizer can begin to work only if the door is closed properly. The door can’t be opened when pressure is in chamber or the power supply is not connected.
Motor door overload protection: the system will automatically reminder user to close the door manually.
Main technical parameter
Design pressure: 0.26MPa
Design temperature: 150°C
Max. working pressure: 0.23MPa
Sterilization temperature range: 105°C~136°C
Temperature accurate: 0.1°C
Temperature homogeneity: ≤±0.5°C
Chamber material: SUS304 stainless steel
Water requirement: distilled water or pure water
Model | Chamber volume | Chamber dimensions(Φ×L) | Outer dimensions (L×W×H) | Net weight | Power supply | Frequency | Power |
MST. B | 23L | 250×460mm | 630×470×450mm | 52KG | 220V | 50HZ | 2900W |
Annotation: custom-made according to special requirement.
23L Visual Mini-size Pulse Vacuum Desk top Dental Autoclave Sterilizer