1, Make a design in the proper size and shape on your computer. Reverse (mirror) the image so that when applied to the skin, it will be the correct way. Duplicate the image to fill the page if printing a wholr page of tattoo designs.
2, Print the image on the glossy side of the tattoo paper on your inkjet printer. If in doubt, print a test page first on ordinary paper.
3, Let the printed sheet dry. ATTENTION: the sheet must be completely dry or the adhesive will not stick and the ink will run.
4, When dry, separate the clear adhesive film sheet from the white backing sheet. Place the clear film, tacky side down on the printed tattoo sheet carefully. Discard the white backing sheet.
5, Cut around each tattoo design, through the two layers(paper and clear film) using scissors, leaving 1mm around the design.
6, You are now ready to use the tattoo. Peel off the clear fil, protective layer. Place the tacky side of tattoo face down on clean dry skin.
7, Wet the back of the tattoo with moist sponge or cloth. Hold for 30 seconds until design shows through.
8, Remove the backing paper carefully to revel your tattoo. Excess glue can be wiped off carefully.
We are sure that this is no harm to our skin.
tattoo stickers