Cheaper than LED streetlight Induction lamp with 100,000H Lower light declay than LED street light Large voltage available

Material:

1.High pressure die-cast aluminium shell 2.Surface static electricity plastics-spraying. 3.Highly pure aluminium reflector, oxidizing surface. 4.Stainless steel hasp. 5.Silicon rubber seal tape resist high-temperature.  6.Curve high-tempered glass or PC cover . 

 

Fixture Size(mm)	Suitable Power	Voltage(v)
850*410*290	40W	12/24/120/220/277/347/480
	60W
	80W
	100W	120/220/277/347/480

Lighting source features:

Long lifespan: Average lifespan 100,000hrs,maintenance free,suitable for long term usage.Energy Saving: Save up to 40% compared to metal halides,13 times more efficient than incandescent light bulbs, and up to twice as efficient as compact    fluorescent lights.Instant On/Off:Instant start and re-strike.High lighting Efficiency:Lighting efficiency >80lm/wHigh Lumens Maintenance:Luminance maintenance rate >70% after 60,000hrsHigh Color Rendering:>80Constant wattage output: The output lamp power varies less than 3% with input voltage fluctuation up to +-10%Wide Selection of Color Temperature :2700K~6500KPower Factor: >0.95Low Total Harmonic Distortion: THD<5%Flicker-free: High frequency(250KHz)Creates a better and more confortable illumination for eyesight protection.Wide Temperature Tolerance: Operating ambient temperature -20~+50 with enclosed fixcture, lamp for -40 availble.Dimming function: Optional intelligent dimming controller.Green Lighting Product: Amalgam adopted 99% recycledrt

Induction lamp Induction Instruction

Induction lamp is a kind of brand-new light source with separated ballast model and self-ballast model that can be used in a variety of applications respectively .In order to achieve optimum effect of the induction lamp, different requirements and instructions of installation need to be respectively followed:

The installation instructions and cautions when applying of induction lamp in the lighting fixture:

1    When screwing in the lighting fixture, the installation of compact induction lamp dose not differ from that of energy saving lamp and incandescent lamp. And it can be ignited at any direction.

2   The separated induction lamp can not be used without loading .The tube and ballast should be connected safety before power on ,otherwise the ballast will be damaged .

 3   It’s better to lay the U-tubes flat instead of overlapping them, otherwise it will reduce the light luminance.

4    Pay attention to the size of lamp holder. Two sizes are now available :E27 and E40.

5    It is better not to be installed in the high temperature places(See the required temperatures in specification)

6    To select different wattage of  induction lamps depends on the illumination and mounting of lighting fixture required for different application.

Streetlight lamp/lower light decline than LED streetlight