120W Single Output Switching Power Supply AC input range selectable by switch Protections: Short circuit/ OverloadCooling by free air convection100% full load burn-in testLow cost, high reliability1 year warranty | case::902 199X98X38mm | AC input voltage range ......... 85~132VAC / 180~264VAC selectable by switchAC inrush current .................. Cold start, 30A at 115VAC, 60A at 230VACDC adjustment range ............ 10% rated output voltageOverload protection ............. 105%~150% shut off, AC recycle to re-start (S-100-7.5: 150%~200%)Setup, rise, hold up time .. 200ms, 80ms, 20ms at full load and 230VACWithstand voltage ................. I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, 1 minuteWorking temperature ............ -10~60OC (refer to output derating curve)Safety standards ................... Design refer to UL1012EMC standards ..................... Design refer to FCC part 15 JConnection ............................ 7P / 9.5mm pitch terminal blockPacking .................................. 0.62kg ; 20pcs / 13.6kg / 0.8CUFT Stock No. | Model No. | Output | Tol. | R&N | Effi. | 50061 | S-120-3 | 3V, 0~20A | ±2% | 100mV | 70% | 50062 | S-120-5 | 5V, 0~20A | ±2% | 100mV | 78% | 50063 | S-120-7.5 | 7.5V, | 0~13.6A | ±1 % | 100mV | 80% | 50064 | S-120-10 | 10V, | 0~10A | ±1 % | 100mV | 80% | 50065 | S-120-12 | 12V, | 0~8.5A | ±1 % | 100mV | 81% % | 50066 | S-120-15 | 15V, | 0~6.7A | ±1 % | 100mV | 81% % | 50070 | S-120-18 | 18V, | 0~5.6A | ±1 % | 100mV | 82% | 50067 | S-120-24 | 24V, | 0~4.5A | ±1 % | 100mV | 84% | 50068 | S-120-27 | 27V, | 0~3.7A | ±1 % | 100mV | 84% | 50069 | S-120-48 | 48V, | 0~2.0A | ±1 % | 100mV | 84% | | |