12 volt LED Driver (waterproof 18W) 1.All voltage input; 2.AC:170-260V; DC:12V 1.5A 3.Waterproof: IP67 4.CE&RoHS

12 volt LED Driver (waterproof 18W)

Features:

Constant Voltage designUniversal AC inputFully encapsulated with IP67 levelWithstand 300VAC surge input for 5secondsProtections:Short circuit/Over load/Over currentCooling by free air convection100% full load burn-in testHigh Reliability

Deatail Speicification:

SPECIFICATION			TYV-12018L002			TYV-24018L002
OUTPUT	Rated DC voltage		12V			24V
	Rated current		1.5A			0.75A
	Current range		0-1.5A			0-0.75A
	Rated Power		18W
	Voltage tolerance		12±0.5V			24±0.5V
	Ripple & Noise		200mVP-P
	Load regulation		±2%
	Setup,Rise time		50ms/230VAC
	Hold up time		20ms/230VAC
INPUT	Voltage range		110-260VAC
	Frequency range		47-63HZ
	Efficiency(Tpy.)		>70%
	Leakage current		0.25mA/240VAC
PROTECTION	Over Current		110%-150%
			Protection type: Hiccup mode
	Short Circyit		Short circuit protection
ENVIRONMENT	Working TEMP.		-25°C-50°C
	Storage TEMP.		-40°C-80°C
	Working Humidity		20-90%RH non condensing, refer to IP67
	Vibration		10-500HZ,2G 10min/1cycle,preiod for 60min,each along X,Y,Z axes
	TEMP. coefficient		±0.03%°C (0-50°C)
SAFETY&EMC	Safety Standards		IP67 approved:Design refer to LVD EN61347-2-13:2006,EN61347-1:2008
	With stand Voltage		I/P-O/P:3KVAC,I/P-COVER:3KVAC,O/P-COVER:500VAC
	Isolation Resistance		I/P-O/P:>100M Ohms/500VDC/25°C/70% RH
	EMC		EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:2008,EN61547:2009
OTHERS	MTBF		50KHours  (25°C)
	Dimension		160*30*21.5mm(L*W*h)
	Weight		178g/pc

12 volt LED Driver (waterproof 18W)