Ads by Google
60W Quad Output Switching Power Supply Q-60
Featues:
1. Universal AC input/ full range
2. Protections: short circuit/ overload/ over voltage
3. Cooling by free air power on
4. 100% full load burn-in test
5. LED indicator for power on
6. All using 105°c long life elctrolytic capacitors
7. Withstand 300VAC surge input for 5 second
8. High operating temperature up to 70°c
9. Withstand 5G vibrtion test
10. High efficiency, long life and high reliablity
11. 3 years warranty
| Model Specification | CH1 | CH2 | CH3 | CH4 |
| DC output voltage | 5V | 12V | -5V | -12V |
| Output voltage error (Note2) | ±2% | ±6% | ±5% | ±5% |
| Rated output current | 5.5A | 2A | 0.5A | 0.5A |
| Output current rage | 0.5-8A | 0.1-3A | 0-1A | 0-1A |
| Wave and noise(Note3) | 100mVp-p | 120mVp-p | 100mVp-p | 120mVp-p |
| Inlet stability(Note4) | ±0.5% | ±1% | ±0.5% | ±0.5% |
| Load stability(Note5) | ±0.5% | ±4% | ±1% | ±1% |
| DC output power | 60W | |||
| Efficiency | 70% | |||
| Adjustable range for DC voltage | CH1:+10,-5% | |||
| AC input voltage range | 85~264VAC/47~63VAC;120~370VDC | |||
| Input current | 1.3A/115V 0.8A/230V | |||
| AC impulse current | Cold-start current 18A/115V 36A/230V | |||
| Leakage current | <1mA/240VAC | |||
| Overload protection | 105%~150%Type:Pulsing hiccup shutdown Reset. auto recovery | |||
| Over-voltage protection | CH1:5.75~6.75V | |||
| High-temperature protection | …… | |||
| Temperature coefficient | ±0.03%°C(0~50°C) | |||
| Setup rise hold up time | 1.6s,20ms,12ms/115VAC 800ms,20ms,60ms/230VAC | |||
| Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes | |||
| Withstand voltage | Input and output interval:3KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||
| Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure:0500VAC/100M Ohms | |||
| Working temperature and humidity | -10°C~+60°C,20%~90%RH | |||
| Store temperature and humidity | -20°C~+85°C,10%~95RH | |||
| Overall dimension | 159*97*38mm | |||
| Weight | 0.55Kgs | |||
| Safety standards | Meet UL1950 | |||
| EMC standards | IEC801-2,3,4,IEC555-2 | |||
| Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100%,others 60%.6.C2,3,11must be knocked down. | ||||
60W Quad Output Switching Power Supply Q-60 for good quality