Ads by Google
| Model | HS-350-5HS-350-12HS-350-15HS-350-24HS-350-27HS-350-48||||||||
| Specification | ||||||||
| DC output voltage | 5V | 12V | 15V | 24V | 27V | 48V | ||
| Output voltage tolerance(Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ||
| Rated output current | 50A | 29A | 23.2A | 14.6A | 13A | 7.3A | ||
| Output current rage | 0-50A | 0-29A | 0-23.2A | 0-14.6A | 0-13A | 0-7.3A | ||
| Wave and noise(Note :3) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 1500mVp-p | 200mVp-p | ||
| Inlet stability(Note :4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| Load stablity (Note :5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ||
| Efficiency | 78% | 80% | 80% | 82% | 82% | 84% | ||
| Adjustable range for DC voltage | 4.5-5.6V | 10-13.2V | 13.5-18V | 20-26.4V | 26-32V | 41-56V | ||
| AC input voltage range | 85~132VAC/180-264VAC 47-63Hz;254-370VDC | |||||||
| Input current | 6.5A/115V 4A/230V | |||||||
| AC INrush current | 25A/115V 50A/230V | |||||||
| Leakage current | <3.5mA/240VAC | |||||||
| Overload protection | 105%~135% hiccup mode, auto recovery | |||||||
| Over voltage protection | 115%-135% cut off the output, auto recovery | |||||||
| High-temperature protection | ERH3>=65°C~70°C Fan on,<=55°C~60°CFan off,>=80°C~85°C,Cut off output(5~15V)Cut off output(5~15)~(24~48V) | |||||||
| Temperature coefficient | ±0.03%/°C(0~50%) | |||||||
| Setup rise hold up time | 200ms,100ms,20ms | |||||||
| Vibration | 10~500Hz,2G 10min,/1cycle,Period for 60min,each axes | |||||||
| Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||||
| Working temperature and humidity | -10°C~+60°C(Refer to output derating curve),20%~90%RH | |||||||
| Store temperature and humidity | -20°C~+85°C,10%~95%RH | |||||||
| Overall dimension | 215×115×50mm | |||||||
| Weight/Packing | 1.15Kgs, 24pc/CTN | |||||||
Note:1.The testing condition for the parameter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%. | ||||||||
ac dc Switch Power Supply for LED