Ads by Google
120W DIN RAIL POWER SUPPLY
Summary:
Single unit output:powers 120W Input voltage 110V/220V±20%100% full load burn-in test Fixed switching frequency at 47-63Hz Protections: Short circuit/Overload/Over voltage Installed on DIN rail TS35/7.5 or15 Size: 65.5*125.2*100mm
Model Specification | BDR-120W-12 | BDR-120W-15 | BDR-120W-24 | BDR-120W-48 |
DC output | 12V 10A | 15V 8A | 24V 5A | 48V 2.5A |
Wave and noise | 50MVP-P | 50MVP-P | 50MVP-P | 50MVP-P |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 76% | 80% | 80% | 80% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
AC input voltage range | 110/220V±20% 47~63Hz | |||
AC input voltage range | Cold-start current 30A/230V | |||
OverLoad protection | 105%~135%hicup mode:auto-recovery | |||
OverLoad protection | 115%~135% rated output voltage | |||
Setup,rise,hold up time | 300ms, 50ms, 80ms | |||
Withstand voltage | I/P-O/P, I/P-FG:1.5Kv O/P-FG:05Kv 1minute | |||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:500VDC/100MΩ | |||
Working temperature | -10°C~+50°C | |||
Safety standards | Design refer to GB4943,UL60950,EN60950 | |||
EMC standards | Design refer to GB9254,EN55022 classB | |||
Weight | 0.79kg | |||
BDR-120W 120W DIN RAIL POWER SUPPLY