Ads by Google
120W Switching Power Supply
ModelSpecification | HS-120-5 | HS-120-7.5 | HS-120-12 | HS-120-15 | HS-120-24 | HS-120-48 |
DC output voltage | 5V | 7.5V | 12V | 15V | 24V | 48V |
Output voltage tolerance(Note:2) | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated output current | 24A | 16A | 10 | 8A | 5A | 2.5A |
Output current rage | 0-24A | 0-16A | 0-10A | 0-8A | 0-5A | 0-2.5A |
Wave and noise(Note:3) | 100mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 200mVp-p |
Inlet stability(Note :4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stablity (Note :5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 80% | 80% | 82% | 82% | 84% | 86% |
Adjustable range for DC voltage | +10% | +10% | +10% | +10% | +10% | +10% |
AC input voltage range | 85-132VAC /176~264VAC selected by swich 47~63Hz;248~370VDC | |||||
Input current | 2.4A/115V 1.2A/230A | |||||
AC INnrush current | Cold-start current 20A/115V 40A/230V | |||||
Leakage current | <1mA/240VAC | |||||
Overload proctection | 105%-150% hiccup mode, auto recovery | |||||
Over-voltage protection | 115%-135% cut of the output, auto recovery | |||||
Temperature coefficient | ±0.03%/°C(0-50°C) | |||||
Setup rise hold up time | 1s,30ms,15ms | |||||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes | |||||
Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10°C~+60°C(Refer to output derating curve),20%~90%RH | |||||
Store temperature and humidity | -20°C~+85°C.10%~95%RH | |||||
Overall dimension | 159×98×38mm | |||||
Weight/Packing | 0.48Kgs; 45pc/CTN | |||||
Note:1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.2.Tolerance include the setting tolerance,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%. |
12V 120W Switching Power Supply