S-100 MEAN WELL/ AC DC S-100 High quality/S-100 UL CE EMC S-100 1years warranty S-100

Switching power supply S-100-5 

MODEL		S-100-3	S-100-5	S-100-7.5	S-100-10	S-100-12
OUTPUT	DC VOLTAGE	3V	5V	7.5V	10V	12V
	CURRENT RANGE	0 ~ 20A	0 ~ 20A	0~ 13.6A	0 ~ 10A	0 ~ 8.5A
	RATED CURRENT	20A	20A	13.6A	10A	8.5A
	RATED POWER	60W	100W	102W	100W	102W
	RIPPLE & NOISE (max.)  Note.2	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
	VOLTAGE ADJ. RANGE	2.85~3.3V	4.75~5.5V	6.75~8.25V	9 ~ 11V	10.8~13.2V
	VOLTAGE TOLERANCENOTE.3	2.0%	2.0%	1.0%	1.0%	1.0%
	LINE REGULATION	0.5%	0.5%	0.5%	0.3%	0.3%
	LOAD REGULATION	0.5%	0.5%	0.5%	0.3%	0.3%
	SETUP, RISE,HOLD TIME	200ms, 80ms, 20ms at full load
INPUT	VOLTAGE RANGE	85 ~ 132VAC/180 ~ 264VAC selected by switch 255 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	70%	78%	80%	80%	81%
	AC CURRENT (Typ.)	2.4A/115VAC   1.2A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 30A/115VAC   60A/230VAC
	LEAKAGE CURRENT	<1mA / 240VAC
PROTECTION	OVER LOAD	105 ~ 150% rated output power (150 ~ 200% rated output power for S-100-7.5 only)
		Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT	WORKING TEMP.	-10 ~ +60oC (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85oC , 10 ~ 95% RH
	TEMP. COEFFICIENT	0.03%/oC (0 ~ 50oC )
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes
SAFETY &EMC(Note 4)	SAFETY STANDARDS	Design refer to UL1012
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Design refer to FCC Part15 J Conduction Class B
OTHERS	MTBF	322.4K hrs min. MIL-HDBK-217F (25 )
	DIMENSION	199*98*38mm (L*W*H)
	PACKING	0.62Kg; 20pcs/13.6Kg/0.72CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.

Switching power supply S-100-5