Power supply technical specification | ||
Low price , reliable quality | ||
High capacity, low working temperature | ||
soft start electric current | ||
short circuit and overload protection | ||
small volume ,light weight | ||
100% enough bear test | ||
inner EMI lead to the smallest wave
| ||
Type | JPQL-240200 | |
Performance | DC OUTPUT1 | |
Rated voltage | 24V | |
output voltage capacitance dimension | -5%~+6% | |
Rated current |
| |
Rated current of trip |
| |
wave and noise | <200mVp-p | |
circuit adjusted frequency | ±0.5% | |
Bear adjusted frequency | ±1% | |
DC output power | 48W | |
efficiency | >80% | |
input voltage dimension | 100~265VAC; 47~63Hz; Voltage is lower than 90VAC,Output voltage will be protected or un-stabilization. | |
input electric current | ||
impact electric current | ||
leakage current | ||
overload protection | 105%~150% | |
temperature | ±0.03%°C 0~50°C OUTPUT, lower than -10°C or more than 65°C, power supply life will be reduced.voltage will be protected or un-stabilization. | |
MTBF | 100k hours at max. load, normal line and 25°C | |
start,up,maintain | 200ms,50ms,30ms | |
against shock character | 10~500Hz,2G 10min./1period,time is 60 minutes | |
against voltage | input—output 1.5KVAC | |
insulation impedance | input time 10M Ohms | |
working temperature, moisture | -10°C~+50°C,20%~90%RH | |
storage temperature, moisture degree | -10°C~+60°C,20%~90%RH | |
outside size | ||
weight | ||
Plug interface type | ||
230VAC25°C 70% RH. The above specification test condition 230VAC input, Rated bear ,25°C 70% RH moisture degree | ||
circuit adjust rate test enough overload inline from the lowest voltage to the highest voltage | ||
Bear adjust rate test bear is from 0% to 100%, other output is 60% rated bear | ||
All output can reach the biggest electric current, but total bear can not be over the biggest output power |
48W UL certification power adapter