SPECIFICATIONS | |
| |
INPUT | |
Voltage Range | 85~264 VAC47~63 Hz;120~370VDC |
AC Current | 2A/115 V 1A/ 230 V |
Efficiency | 73%(LS-60-5); 76%(LS-60-12); 77%(LS-60-15); 79%(LS-60-24); 80%(LS-60-48); |
Inrush Current | Cold start 30A/115VAC 60A/230VAC |
Leakage Current | smaller than 3.5 mA/240VAC |
| |
OUTPUT | See Datasheet |
| |
PROTECTION | |
Over Load | 135%~165% |
| Protection type: Fold back current limiting, recovers automatically after fault condition is removed. |
Over Voltage | 115%~135% |
| Protection type: hiccup mode, recovers automatically after fault condition is removed. |
| |
ENVIRONMENT | |
Working Temp., Humidity | -10°C~+60°C;20%~90 %RH |
Storage Temp., Humidity | -20°C~+85°C;10%~95 %RH |
Vibration | 10~500Hz,2G 10min./1cycle,period for 60min, each long X, Y, Z, axes |
| |
SAFETY | |
Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| |
STANDARD | |
Safety Standard | Design refer to UL1012, UL1950,TUV EN60950 |
EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| |
OTHERS | |
Weight | 0.51Kg |
Packing | 24pcs/13.1Kg/0.7CUFT |
| |
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
| 3.Tolerance: includes set up tolerance, line regulation and load regulation |
| 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
| |
OUTPUT | |