| SPECIFICATIONS | |
| | |
| INPUT | |
| Voltage Range | 85~264 VAC47~63 Hz;120~370VDC |
| AC Current | 2A/115 V 1A/ 230 V |
| Efficiency | 76%(LS-70-12); 77%(LS-70-15); 79%(LS-70-24); 80%(LS-70-48); |
| Inrush Current | Cold start 30A/115V 60A/230V |
| Leakage Current | smaller than 3.5 mA/240VAC |
| | |
| OUTPUT | See Datasheet |
| | |
| PROTECTION | |
| Over Load | 135%~165% |
| | Protection type: Fold back current limiting, recovers automatically after fault condition is removed. |
| Over Voltage | 115%~135% |
| | Protection type: hiccup mode, recovers automatically after fault condition is removed. |
| | |
| ENVIRONMENT | |
| Working Temp., Humidity | -10°C~+60°C;20%~90 %RH |
| Storage Temp., Humidity | -20°C~+85°C;10%~95 %RH |
| Vibration | 10~500Hz,2G 10min./1cycle,period for 60min, each along X, Y, Z axes |
| | |
| SAFETY | |
| Withstand Voltage | I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| | |
| STANDARD | |
| Safety Standard | Design refer to UL1012, UL1950,TUV EN60950 |
| EMC Standard | Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024 |
| | |
| OTHERS | |
| Weight | 0.51Kg |
| Packing | 24pcs/13.1Kg/0.7CUFT |
| | |
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
| | 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
| | 3.Tolerance: includes set up tolerance, line regulation and load regulation |
| | 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
| | |
| OUTPUT | |
