150W LED Power Supply High efficiency, high reliability Switch to select the input voltage range Size: 199*110*50mm(L*W*H)

150W LED Power Supply - 12V AC Adaptor, 12V transformer, LED transformer

High efficiency, high reliability

Switch to select the input voltage range

100% load burn-in test

Protections: Short circuit / overload / over voltage

Short circuit, overload, over voltage protection

Air cooling

2-year shelf life

Size: 199*110*50mm(L*W*H)

Application: Using for LED Strip lighting, 12V AC Adaptor

Model No.		DF-P-150-5	DF-P-150-9	DF-P-150-12	DF-P-150-13.5	DF-P-150-15	DF-P-150-24	DF-P-150-27	DF-P-150-48
Output	DC Output Voltage	5V	9V	12V	13.5V	15V	24V	27V	48V
	Output Capacity Tolerance	±2%	±1%	±1%	±1%	±1%	±1%	±1%	±1%
	Rated Output Current	30A	16.7A	12.5A	11.2A	10A	6.5A	5.6A	3.2A
	Output Current Range	0-30A	0-16.7A	0-12.5A	0-11.2A	0-10A	0-6.5A	0-5.6A	0-3.2A
	Output Power	150W	150.3W	150W	151.2W	150W	156W	151.2W	153.6W
	Ripple and Noise	150mVp-p	180mVp-p	180mVp-p	180mVp-p	180mVp-p	240mVp-p	240mVp-p	240mVp-p
	DC voltage adjustable range	±10%	-12%,+15%	-12%,+10%	-12%,+11%	±10%	-12%,+16%	-12%,+11%	±10%
	Start, rise, hold time	100ms,50ms,20ms Over Load
Input	Input Voltage Range	88--132 VAC/176--264VAC  47--63Hz,  Select from the switch 248~370VDC
	AC Input Current	less than 3.2A/115 V 1.6A/ 230 V
	Effeciency	78%	80%	82%	83%	84%	85%	86%	87%
	Surge Current	Cold Start Current 35A/230VAC
	Leakage Current	less than 3.5mA/240VAC
Protection Feature	Overload Protection	110%--160%
		Protection Mode: cut output, automatic recovery returned
	Over Voltage Protecton	115%--135%
		Protection Mode: cut output, automatic recovery returned
Environment	Temperature, humidity	-25degree to +45degree; 20% to 90 %RH
	Storage temperature, humidity	-20degree to +85degree; 10% to 95 %RH
	Earthquake resistance	10 ~ 500Hz, 2G 10min. / 1 cycle, duration 60 minutes, each axis
Safety	Pressure	Between input and output: 3KVAC input and ground: 1.5KVAC output and ground: 0.5KVAC
	Insulation resistance	Input and output, the input and ground, output and ground: 100M Ohms/500VDC
Standard	Safety standards	UL1012, UL1950, TUV EN60950
	EMC Standard	EN55022, EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, EN55024
Others	Gross Weight	0.8Kg
	Packing	16pcs/13.8Kg/0.95CUFT
Remark	1.  All parameters are not specified, the are 230VAC input, rated load and 25 degree, the measured value.2.  Ripple and noise voltage is in the 20MHz bandwidth of the oscilloscope with a 12 inch twisted pair terminal 0.1μ and 47μ capacitance increase measured.3.  Set the error tolerance is the voltage, voltage regulation and current regulation of the total.4.  The power to consider as a device installed in the final device, the device must be re-confirmed its EMC targets.

Danfore introduction

150W 12V LED Transformer (DF-P-150)