T-100 SERIES POWER SUPPLY,SWITCH POWER SUPPLY
Model Specification | T-100C | T-100D | ||||
CH1 | CH2 | CH2 | CH1 | CH2 | CH2 | |
DC output voltage | 5V | 12V | -5V | 5V | 12V | -5V |
Output voltage rang(Note:2) | +/-2% | +2,-6% | +2,-6% | +/-2% | +2,-6% | +/-6% |
Rated output current | 10A | 2.5A | 1A | 6A | 2A | 2A |
Output current range | 2-12A | 0.2-2.5A | 0.1-1A | 2-10A | 0.1-2A | 0.2-2A |
Wave and noise(Note:3) | 80mVp-p | 150mVp-p | 150mVp-p | 80mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note:4) | +/-0.5% | +/-1% | +/-1% | +/-0.5% | +/-1% | +/-1% |
Load stability(Note:5) | +/-1% | +/-5% | +/-5% | +/-1% | +/-5% | +/-5% |
DC output power | 100W | 102W | ||||
Efficiency | 77% | 79% | ||||
Adjustable range for DC voltage | CH1+10,-5% | CH1+10,-5% | ||||
AC input voltage range | 85~132VAC/170~264VAC selected by switch 47~63Hz;248~370VDC | |||||
Input current | 2.5A/115V 1.25A/230V | |||||
AC inrush current | Clod-start current 30A/115V 60A/230V | |||||
Leakage current | <0.5 mA/240VAC | |||||
Overload proctection | 105%~135%Type:pulsing hiccup shutdown Reset:autorecovery | |||||
Over-voltage proctection | 105%~135%Type:pulsing hiccup shutdown Reset:autorecovery | |||||
High-temperature and protection | 105%~135%Type:pulsing hiccup shutdown Reset:autorecovery | |||||
Temperature coefficient | +/-0.03(0~50) | |||||
Setup, rise,hold up time | 200ms,50ms,16ms | |||||
Vibration | 10-500Hz,,2G10min,/cycle, periodfor 60min,Each axes | |||||
Withstand voltage | Input and output interal:1.5KvAC,Input ad enclosure:1.5KvAC Output and enclosure:0.5KvAC | |||||
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||
Working temperature and humidity | -10+60(Refer to output derating curve),20%90%RH | |||||
Stoerall dimension | -20+85.10%~95%RH | |||||
Overall dimension | 199*110*50mm | |||||
Weight | 0.83Kgs | |||||
Safety standards | Meet UL 1012 requirement,(not apply for the mark) | |||||
EMC standaras | Meet FCC PART15J Conduction class B | |||||
Note:1The testing condition for the paramenter aboveis:230VAC input,rated load,2570%RH Temperature. 2Error.include the setting error,line stability and load stability.(Note;5). 3Wavetest:adoptingA12 double wire for 20MHz,and0.1UF and 47UF capacitor short-circuit fou interrupting 4Inlet voltage stability test: when is over load,the lowest voltage of inlet is up to the highest voltage. 5Load stability test:The load is from 0%to 100% |
T-100 SERIES POWER SUPPLY,SWITCH POWER SUPPLY