Ads by Google
S-120 Switching power supply Product
120W single output switching power supply specification
ModelSpecification | S-120-12 | S-120-15 | S-120-24 | S-120-48 |
DC output voltage | 12V | 15V | 24V | 48V |
Output voltage error (Note2) | ±1% | ±1% | ±1% | ±1% |
Rated output current | 10A | 8A | 5A | 2.5A |
Output current rage | 0-10A | 0-8A | 0-5A | 0-2.5A |
Wave and noise(Note3) | 120mVp-p | 125mVp-p | 150mVp-p | 150mVp-p |
Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability(Note5) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
DC output power | 120W | 120W | 120W | 120W |
Efficiency | 80% | 81% | 83% | 84% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
AC input voltage range | 88~132VAC/ 176~264VACselected by switch 47~63Hz;255~370VDC | |||
Input current | 2.6A/115V 1.3A/230V | |||
AC impulse current | Cold-start current 30A/115V 60A/230V | |||
Leakage current | <1mA/240VAC | |||
Overload protection | 105%~150%Type:TOLDBACK Reset: auto recovery | |||
Over-voltage protection | …… | |||
High-temperature protection | …… | |||
Temperature coefficient | ±0.03%°C(0~50°C) | |||
Setup rise hold up time | 200ms,50ms,20ms | |||
Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes | |||
Withstand voltage | Input and output interval:1.5KvAC Input and enclosure:1.5KvAC Output and enclosure:0.5KvAC | |||
Isolation resistance | Input and output interval:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||
Working temperature and humidity | -10°C~+60°C,20%~90%RH | |||
Store temperature and humidity | -20°C~+85°C,10%~95RH | |||
Overall dimension | 199*98*38mm | |||
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25°C 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100% |
120W single output switching power supply