Drop Wire Module FTTH Customer Terminal Box Displacement Connecter Protection STB Module STB Connect Module

The STB module provide a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 5-point plug in module to provide continuity and a range of other options. Removal of the plug-in module does not disturb wire connections but makes contacts to them available for testing of both sides of the network.

It is especially recommended for:1. Outdoor connections where the enviromental conditions are extremely agressive.2. Terminations where user development characteristics require future flexibility in terms of the type of protection or filtering capabilities.Current conducting capacity 20 A, 10 A per conductor for 10 minutes at least, without causing deformation to the moduleInsulation resistanceDry atmosphere: >1010 Damp atmosphere(ASTM D618, procedure F): >1010 Salt fog:(ASTM B117) >109 Immersion in water: (15 days in 3% NaCl solution) TELCORDIA TR-NWT-000975 (Formerly Bellcore)>109 Contact resistanceRmaterial + Rbridge contacts + Rwire contacts <10 m Increase in contact resistanceAfter climatic tests: <2.5 m After 50 reinsertions: <2.5 m Dielectric strength >3,000 Vdc for 1 minuteMechanical characteristicsProtector ground contactTinned hard brass Continuity contactTinned hard brassPlug-in module bodyFlame retardant (UL94) fiber-glass reinforced polycarbonatePlug-in module sealantGel O ring EPDMInternal ConfigurationContinuityASSTB 260 V GDT230 V GDTAS-STB-P

Drop wire connector module

Subscriber terminal block Module

STB module ANSHI

Disconnection Module

STB module with protection

Drop Wire Module

Subscriber Terminal Block

Insulation Displacement Connection

Disconnection Module

Quick Connect Module

DROP WIRE TERMINATION

ANSHI Subscriber terminal block Drop wire module

ANSHI 1 Pair Subscriber Terminal Block Module With Protection

ANSHI GAS Subscriber Terminal Block Module

ANSHI Subscriber Terminal Block Without Protection Module