Ads by Google
MTC01 series oil (water) heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the cooling tank and cooled by indirect cooling. It is then pressurized by the high- pressure pump, sent to the heating tank and finally to the mould with a constant temperature. With our optimized design, it can reach a maximum of 200°C.
Technical Parameters:
Type | Temp. | Electric Power | Pump Power | Pump Flow | Pump head | Pump Type | Cooling | Mold Connector | Dimension | Weight (kg) | |
6-w | watertype120°C | 6kw | 0.37kw | 40L/min | 30m | Horizontal Pump | Direct120°Ccooling; Indirect cooling90°C | 3/8 2*2 | 580×350×780 | 62 | |
9-w | 9kw | 0.75kw | 100L/min | 40m | 3/8 4*2 | 680×350×780 | 90 | ||||
12-w | 12kw | 0.75kw | 120L/min | 60m | 3/8 4*2 | 680×350×780 | 110 | ||||
18-w | 18kw | 2.2kw | 180L/min | 80m | 3/8 4*2 | 680×350×780 | 135 | ||||
6-O | Oil type 200°C | 6kw | 0.37kw | 40L/min | 30m | Indirect cooling90°C | 3/8 4*2 | 580×350×780 | 75 | ||
9-O | 9kw | 0.75kw | 100L/min | 40m | 3/8 4*2 | 680×350×780 | 100 | ||||
12-O | 12kw | 0.75kw | 120L/min | 60m | 3/8 4*2 | 680×350×780 | 125 | ||||
18-O | 18kw | 2.2kw | 180L/min | 80m | 3/8 4*2 | 680×350×780 | 135 | ||||
6-O(2D) | 6kw×2 | 0.37kw*2 | 40L/min | 30m | 3/8 4*2 | 900×450×950 | 120 | ||||
12-O(2D) | 12kw×2 | 0.75kw*2 | 120L/min | 60m | 3/8 4*2 | 900×450×950 | 140 | ||||
Mould Temperature Controller