Welcome to ECVERY
Hot! temperature and humidity testing meter with usb interface
Hot! temperature and humidity testing meter with usb interface
Supplier Info
[China Supplier]
Contact Person : Ms. Huang Tina
Tel : 86-0755-33016462
Fax : 86-0755-33016305
Product Detail
1. Ultra-Portable, Professional Quality and Low Cost 2. Directly Connect to PC via USB Interface 3. Firmware is Upgradeble

 INTRODUCTIONS

This data logger measures and stores up to 32,000 humidity(0 to 100%RH) and 32,000 temperature(-35 to 80°C (-31~176°F)) readings. Especially, dew point and more professional applications can be provided by the unique PC software ETicsTM. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging or cofirm and clear LED alarm.

APPLICATIONS

This data logger is used mainly to monitor and verify humidity&temperature-sensitive goods, equipment or areas.

Example: cold Chain,Refregistor,lab,transportation

KEY FEATURES  

Portable, compact and low cost Easy to use

Unique and uniform PC control software: ETics

USB interface directly communicate with PC for setup and data download 

Firmware is user upgradeable 

Each unit has single serial number

User can set access password fo each data logger

Two point calibration for each channel

Start logging method: Immediately, Button, Start at

Dew point calculated via software

Long Battery Life: Approx. 3 years @ 1minute sample rate Replaceable lithium battery and data is not lost if exhausted Alarm and status indication via LED

Enhanced design make it reliable and stable

Specifications

ITEM NO: ER-20

Temperature measurement range: -35 to 80°C(-31 to 176F)

Temperature accuracy : ±0.3°C(±0.9°F)

Temperature resolution : 0.03°C(0.05°F)

Relative Humidity measurement range: 0 to 100%RH

Relative humidity accuracy: ±2%RH

Relative humidity resolution: 0.1%RH

Without LCD display

Memory Capacity: 64KBytes(Total 32,000 readings for all channels)

Sample rate:  User selectable from once every 10 seconds to once every 12 hours

PC Software:ETics software and USB driver required (Included in CD) 

Power Supply:User replaceable 1/2AA 3.6V Lithium Battery, 1200mAh

Battery Life:Approx. 3 Years @ 1 Minute Sample Rate

Case Material:ABS, TPU, PC

Dimentions:120mm×35mm×30mm(4.7"×1.4"×1.2")

Weight Approx. : 82g

Hot! temperature and humidity testing meter with usb interface

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.