Ads by Google
x-ray crystal analyzer
FeatureSimple, does not require professional knowledge and technical skill, the figures point of view, easy to observe, to reduce the reading error, the display can be zero at any location, easy to show that the chip angle of deviation. Dual goniometer can work simultaneously to improve efficiency. Peak amplification with special integrator. Improve the detection accuracy. X-ray tube and high voltage integrated, increasing the reliability of high voltage, high voltage detector module with DC high voltage, vacuum suction sample plate, improved accuracy and speed of goniometer
Equipment Use
Temperature 2º-30ºNot more than 70% relative humidityPower supply: single phase 220V, 50HZ, power supply voltage fluctuations not more than ±10%, power capacity not less than 0.5KVA, have a good grounding, grounding resistance of less than 4Power lines may not have welding, high frequency furnace and other equipment and arc caused by high-frequency interferenceTYX-200Accuracy of ±30 s, displayed as digital. Minimum reading of 10sTYX-300By ray double crystal diffraction, precision ±15s, displayed for the digital, the smallest reading is 1sTYX-2H8TYX-200 in the original, based on improved goniometer structure, increasing the load-bearing track, X-ray tube sets, frame body, the sample sets increased sample stage height of 100mm, measurable 1-30 public nearly 2-8-inch diameter Sample. Angle display: number manner, measurement accuracy ±30sTYX-2H8 can be equipped with X-ray crystal direction finderTA-type goniometer
Designed by a round rod lens, samples stage with a load-bearing track, can weigh 1-30kg,2-6 inches in diameter(can be increased to 8-inch) crystal rod, the samples has really set the stage suction device increases. The model measures the rod crystal goniometer reference plane, but also measure the sheet surface of the chip.TB-type goniometerDesigned by a round rod lens, sample stage with a load-bearing track, and add a V-bearing guide, can weigh 1-30 kg, 2-6 inches in diameter (can be increased to 8 inches), length 500mm crystal rod, the platforms are really in the air sample device, the type goniometer measurable rod crystal face, but also measure the sheet surface of the chip
TC-type goniometer
Designed by b round rod lens, sample stage with a load-bearing track, and add a wheel-type frame, can weight 1-30kg,2-6 inches in diameter (can be increased to 8 inches).500mm length of the crystal rod, the sample plus there is a vacuum suction device platform, the model goniometer in the measurement, the crystal can roller rotating rod, which measures the angle of crystal rod end, but also measure the sheet surface of the chip TD-type goniometer
This type of post-wafer crystal goniometer measurement reference plane designed sample stage equipped with breathing devices, measure 2-8 inches above the sheet 0.5mm thick sample
x-ray crystal orientation analyzer
x-ray tube Cu target
tube voltage 30kVP
tube current 0-5Ma
sample rotate angle -10º to +50º
counter rotate angle -10º to +50º
tube voltage of counter 500V-1100V
time constant 0.1second,0.4second,3second
slit 4´and 5´ and 6´
x-ray crystal orientation analyzer