Welcome to ECVERY
Cold Flex Temperature
Cold Flex Temperature
Supplier Info
[China Supplier]
Contact Person : Ms. Zhu Jane
Tel : 86-25-83171150
Fax : 86-25-86200095
Product Detail
Determines the effects of low temperatures on the stiffness of the polymer material

Product DescriptionCold Flex Temperature Tests. Conforms to BS2782 : Part 1:Method 104B. Determines the effects of low temperatures on the stiffness of the polymer material. The appartus consists of a fixed clamp and a revolving clamp which holds the test sample rigidly at each end. The test sample is submerged in a Low Temperature Liquid Bath. The revolving clamp connects to a pulley dial indicator, graduated in 1 degrees, which is subject to a given torque produced by a dead load acting at a fixed radius.

Test DescriptionThe pulley dial inicator is locked in the zero position by a punger. The initial temperature is set so that when the plunger is released, the test sample twists about 30 deg C. The temperature is then increased by 2 deg C / min and the amount of twist measured every 5 deg C. When the angle of twist obtained is 400 degrees or greater, the resultant temperature is recorded.

Part NumbersRR/CFLEX

Complies with Standard(s)BS 2782 : PART 1: METHOD 104B

Cold Flex Temperature

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.