1. Temp. Range: Amb.+5C to 150C 2. Time Range: 99h59min 3. Temp. Discrepancy: plus-minus 0.5C

Sample Concentrator-ND100-1

 The ND100 consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block . The gas at 5 to 10 psig passes through the distribution manifold. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the correct height. Needles or glass pipets blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents. Acid resistant models are available for corrosive application Features1. High precision and wide range of temp control2. Blowing a large number of samples at one time3. Blowing each sample independently4. Amount of airflow can be adjusted5. Easy operation; safe and reliable to use Specification1. Temp. Range: Amb.+5°C ~ 150°C2. Time Range: 99h59min3. Temp. Discrepancy: ≤±0.5°C4. Display discrepancy: ±0.1°C5. Heating Time: ≤30min ( from 40°C  to 150°C)6. Temp. Discrepancy @100°C: ≤±0.5°C7. Temp. Discrepancy @150°C: ≤±1°C8. Max. Gas pressure: 0.02Mpa(using needles ≤16)                                      0.05Mpa(using needles ≥16)9. Nitrogen Consumption: 15L/min10. Needle Length:150mm11. Dimensions(mm): 230X225X45012. Weight(kg): 7.0kg Insert Blocks

Insert Blocks

 

Type	Parameter	Capacity	Dimensions(mm)
MD01	6mm	48	95.5*76.5.50
MD02	7mm	48
MD03	10mm	24
MD04	12mm	24
MD05	13mm	24
MD06	15mm	12
MD07	16mm	12
MD08	19mm	12
MD09	20mm	8
MD10	26mm	8
MD11	28mm	4
MD12	40mm	3
MD13	0.2ml	48
MD14	0.5ml	48
MD15	1.5ml	24
MD16	2.0ml	24
MD18	16mm	12
MD19	15mm	12

Sample Concentrator