1.tests balls:Dia 80, 100, 120. 2.test one kind at a time

Instuction,

1.It mainly tests the followings kinds of balls: Φ80, Φ100, Φ120.It only test one kind at a time.

When teat the other transmission tubes should be closed.

2. The model NO. is SF-2,and the falling distance is 3500mm.

3.Count the number of droping-ball through the photoelectric sensor signals.

4.This equipment can be directly put on the smooth ground, only need a power of 380V.

5.When test only need one person to operate.

6.The tested steel ball should be smooth without defect.

7.Before powering up, the operate should add some lubricating oil into the reduce and screws.

8.In the machine there are 16 steel balls in all. If a ball is damaged, it should be picked up and add another. If it is fast when testing, it can be adjusted by add the weight of the outlet, the weight can be adjusted according to need.

Note: Before changing the weight, the machine should be stopped.

Main Technique Parameter of Falling-ball Test Machine

overall Dimension:1900mm×1600mm×4800mmMotor Type:Type Y100L-4Power:2.2KWReduce:BW02-29Vertical conveying belt: using the belt to convey, and matched with adjusted deviceElectricity: adopt photoelectron counter, which can make sure counting correct and stable

Falling-ball test machine