Welcome to ECVERY
Laptop test equipment laptop battery tester T1
Laptop test equipment laptop battery tester T1
Supplier Info
[China Supplier]
Contact Person : Mr. John Oreo
Tel : 86-0755-83003487
Fax : 86-0755-83676015
Product Detail
laptop battery repair tool with software 1.test 2.charge 3.discharge 4.Compatible with 95% of laptop batteries Product show

Laptop battery repair tool with software




 is a multi-function battery testing device, having the features below:


with one channel, supporting one intelligent batterySupporting charge, discharge, test, capacity correction, charge / discharge 50% capacityLCD for displaying battery informationLED for indicating working statusWith charge-key, discharge-key, backlight-key and function-keyPre-charge, fast charge and constant voltage charge for charging stages and the variation range of the values of the constant current and the constant voltage is less than 1%Constant current for dischargingWith a USB port for connecting with computers, master machine can monitoring and control slave machine


Basic Parameters

 Dimensions: 201 x 99 x 35 mm


Weight: 333g


Adapter   Input: AC 100 ~ 240 V   Output: DC 24V 2.65A


Function Introduction



Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. 



Constant current discharge for double loads


Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager


External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered


Tester will stop discharging if one of the conditions below is met.



Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.


Normal:             Test           OK           Shown on LCD


Abnormal:          Test           NG           Shown on LCD


Capacity Correction


The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip.


50% Capacity

 CD50%: charge firstly, and then discharge to 50% capacity


DC50%: discharge firstly, and then charge to 50% capacity


Online Functions

 Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.



 1).1 * adapter


2). 1 * USB cord


3). 1 * CD


4). 13 * connectors


5). 10 * cables


6). 10 * jumpers


7). 1 * load


Laptop test equipment laptop battery tester T1

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.