Ads by Google
LEAKING TESTER FOR HEPA FILTER
Introduction
Hepa filters are the key point of high-efficiency cleaning air filtration system. The manufacturer must test each hepa filter before packaging and delivery. So far, the most popular test methods for hepa filter are photometer scanning and counter scanning. These two methods are popular, but high labor-consuming and in-efficient. Besides, filter in certain structure such as W-type can’t be tested. Under this condition, the market call on an easy-operation, high-efficiency and reliable tester for leaking.
The machine is a new type leaking tester ,which is self developed and produced according to the theory that the mist can be filtered by hepa filter in the basic of mist leaking test by Xinxiang North Filter Co.,Ltd, complying with the demand of the market.
Technical Parameter
Rated voltage: 220V/380V 50HZ
Rated power: 3.56KW
Oil barrel capacity: 2.5L
Weight of machine: 350kg
Max. size of filter: 1200x700x300mm
Min. size of filter: 300x300mm
Max. wind pressure of leak testing: 1210Pa
Max. mist output: 210m3/min
Performance Characteristics
Fuming particle diameter is between 0.3 ~ 0.5 um, particle arranged evenly, and in line with the dust particle size of the counting scanning method, able to meet the requirements of HEPA filters leaking test.
For a wide range of various types of HEPA filters with and without separators to detect.
High detection efficiency, only two seconds for single filter detection, cut detection time short, and reduce the cost of production.
Meets environmental requirements, the device emitted mist without any harm to the operator. The detection process has no mist emission outwards, no impact on the surrounding environment.
Electrical control system uses PLC control, easy to operate with high reliability.
Cheap raw material consumables, negligible testing cost. It is currently the most cost-effective HEPA filter tester in domestic.
HEPA Filter mist tester Air Leak Tester FOR HEPA FILTER