Ads by Google
HPC-602 Portable Smoke opacimeter
Main Features:
Separated structural design, operation more convenient and more accurate data.
Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke;
Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF;
High-brightness digital display;
Use of "air curtain" technology to protect the optical system from contamination;
Automatic detection of room temperature control, anti-condensation can affect the test accuracy;
Automatically attached to the time display; optional speed measurement and oil temperature measurement
Show where the failure of automatic diagnosis unit;
Equipped with built-in printer (or digital RS-232A interface or analog interface);
In line with ISO11614 and GB3847-2005 technical requirements.
Main technical parameters:
Test Scope:
No light transmission N::0~100% (equivalent to smoke value 0 ~ 10FSN)
Light absorption coefficient K:0-16 .06 m-1
RPM:0-9990rpm OIL TEMP: 0-150°C
Indication error of +/- 2% ( measured value)
Stability of automatic zero adjustment, moment drift less than+/-1% / 4H
Repeatability repetition error of+/-1%
Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1°C
Output mode: digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking
Measurement of smoke temperature of 70 degrees C ( automatic thermostat ), when the temperature error = + 10%, temperature and error indicator light
Environmental conditions of temperature -5 to 50 DEG C, relative humidity 90%
AC100-240V 50/60Hz 150VA power source power consumption
Dimensions ( including bracket) control portion of the 240mm (L) x 310mm (W) x 170mm (H)
Light path part 130mm (L) x 400mm (W) x 390mm (H)
Weight control section 4kg
Light path part 5kg
HPC-602 Portable Smoke opacimeter