Fuel Injection Pump Test Stand, Test Bench Test: diesel fuel injection pump Power: 7.5kw, 11kw ,15kw, 18.5kw etc.

Test Stand, Test Bench 

Diesel fuel injection pump test bench, test stand color CRT displayTen kinds of rotation speeds presettingRotation speed, count, temperature, air pressure and advance angle are displayed by computer screen

Diesel Fuel injection Pump Test bench Advance TypeFeatures:1. Changing frequency changing rotation speed;2. Small fall of rotation speed and high output torque;3. High measurement precision, High efficiency, Energy saving;4. Over voltage, Overload and short circuit protection; 5. Ten kinds of rotation speeds presetting;6. Constant temperature controlled;7. Rotation speed, count, temperature, air pressure and advance angle are displayed by computer screen.8.  Built-in Air resource9.  Can be operated from both sidesFunctions:1. Measurement of each cylinder's delivery at various rotation speeds2. Checking each cylinder's injection starting position and delivery interval angle3. Checking and adjust the mechanical speed governor.4. Checking and adjusting the distributor pump.5. Checking and adjusting behavior of supercharging and compensatory device. 6. Measurement of the reflux delivery of distributor pumps7. Checking the electromagnetic valve of distributor pumps. (12V/24V)8. Measurement of the distributor pump's body internal pressure.9. Measurement of the advance angle. 10. Checking the sealing of fuel injection pump body11. Install tube of auto-sucking oil supply can check oil supply pump. (including VE pump.)12. Measurement of rack travel (Option) 13. Machine oil lubrication system (Option)14. Cast iron base (Option)15. Forced Cooler system (Option)Technical parameters:1. Adjustable rotation speed range: 0~4000 RPM2. Test cylinders: 12.3. Rotation speed presetting: 10 kinds.4. DC. Supply: 12/24V5. Feeding pump motor: 1.1kw6. Series of graduate glass: 45cc, 150cc. The 260cc is optional 7. Volume of oil tank: 60L 8. Main shafts Center height: 125mm 9. Flywheel inertia's moment: 0.8kg.M2, 10. Stoke counting: 50-9999 11. Control temperature of fuel oil (): 40+2 12. Feed oil pressure: low pressure 0-0.4MPa, high-pressure 0-4Mpa.      Internal pressure: 0-0.16MPa, 0-1.6MPa.13. Rotation direction of Main shafts: Clockwise or Anticlockwise 14. Packing dimension: 5M3 CBM 15. Packing weight: 900kg 16. Output power: 5.5kw, 7.5kw, 11kw and 15 kw or on request17. 3-phase power supply: 380v/50hz or on request. 18. Color available: Green, blue, red, yellow or on request.

Fuel Injection Pump Test Stand, Test Bench

Fuel Injection Pump Test Stand, Test Bench