Welcome to ECVERY
MAYASTAR Electric Stentering & Heat Setting Machine
MAYASTAR Electric Stentering & Heat Setting Machine
Supplier Info
[China Supplier]
Contact Person : Mr. Yuan Avon
Tel : 0086-10-59560447
Fax : 0086-10-59560491
Product Detail
MAYASTAR Electric Stentering & Heat Setting Machine

MAYASTAR Electric Stentering & Heat Setting Machine

——the assistant machinery of textile and lace industry

MAYASTAR Electric stentering & heat setting machine can stenter and heat setting 900mm to 2000mm fabric. This machine adopts upper and lower Electric heating board to supply the temperature, the temperature of inside upper and lower Electric heating board can reach 250°C at max., thus it will perform very good stentering and heat setting effect. You can adjust the temperature according to your fabrics to the best suitable condition.

As for as it is mini stentering and heat setting machine, so if you need dip the fabrics into the fabric softener before stentering, you should hang the wet materials in the air and let it to be air-dry to 70% dry. Directly put the full wet material for stentering is nor workable. For the machine body is just 6m long, the heating time inside just too short, 2 seconds come out from another side, so it cannot act good stentering function to full wet material. A little moist material is most suitable to stentering and heat setting on this set machine.

All kinds fabrics, chemical fabrics, polyester, silk products, cotton products can be stentered and heat set on this machine. It will perform same good stentering and heat setting effect as same well made by electric ironing machine and tube style oil heating machine. And all the materials that can be stentered and heated setting by electric ironing machine and tube style oil heating machine can work on this set machine.

MAYASTAR Electric stentering & heat setting machine is used in the textile and lace industry as corollary equipment. Mainly applied to textile, lace embroidery enterprise for product after process and arrangement, and it is the guarantee of products quality. This machine is featured in small size, low cost, environmental protect, low requirement of production condition, easy in install and use, and it has been welcomed by related industry. Humidify chemical blended fabrics, polyester filament, polyester drawn textured yarn knitted fabric, cotton knitted fabric, blend fabric etc. All could be stentered and settled by requirement, at the same time, it also supply with heating and drying, cleanup some tension, coordinate with fabric latitude and longitude, for better leveling ,stable products. Electric stentering & heat setting machine will greatly save your fabric setting cost, power usage: 20 degrees per hours.

Special Features:

Operating method: A: electric heat, heat balance constant temperature. B: monolayer level recycling chain Operating width: 900mm to 2000mm, the width can be adjustable according to the material width. The material should be 90cm wide at minimum, and 2m wide at max. Design speed: 2 to 15m/minute power usage: 20 degrees per hours Transmission: user-machine interface control and servomotor synchronized adjusting transmission Method of fabric supply: needle plate Inner box running temperature: 250°C. Voltage: 380V Frequency: 50Hz, 3pH Control power: 220V Warm up power: 70kW (40 to 60 minutes) Constant temperature: 5 to 10kW (operating temperature) Dimensions: 6,000 x 3,000 x 2,000mm Customers can book the model according to their requirements.

MAYASTAR Electric Stentering & Heat Setting Machine

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.