Product name:size point interlining coating machines
Application:this coating machines Suitably applied to the coating of base fabrics made of none-woven,woven and warp knitted inlay fabrics to produce high-grade bonded interlining
Features:1. Fashion design, short process and easy operation
. 2. Machine temperature control by use of intelligent instrument and Motor speed change being done by converteMain Technical Parameters:
coating machines Product Width(mm): 1200, (1600)
Machine Speed (m/min): 0~30
Power supply(kw): (380V 5 0HZ) 70kw
Oil Heating: 15kw
Overall Dimension: (mm) 12000×2100×2000
Weight(T): About 4
This coating machines is suitable for coating mid and high grade size point laminating fabric of nonwoven, knitted, warp-knitted-weft-insertion fabrics, and base cloth.2. Main Technological Requirements:
2.1 Coating machines width:1200mm
2.2 Speed: 5-30m/min
2.3 Power units:
2.3.1 size point coating machines driving motor: 1.5 kW Size furnishing pump motor: 0.75 kW
Size mixing pump motor: 0.75 kW Air compressor: 3 kW
Heating power of dryer: one burner 62.8J
Padding flat driving motor: 2.2 kW Circulation fan: 5.5 kW
Humidity exhaust fan: 100W
2.3.2 Total power: 3 phase 380V 50Hz Control power: 220V Installed capacity:20 kW3. Structure Characteristics
3.1 This coating machines consists of debaucher, size point device, dryer, cooler, rebutter and electric control board.
3.2.1 Roll-off creel is suitable for piece or package fabrics to meet demands of different cloth feeding.
3.2.2 Tension of cloth feeding can be adjusted by hand wheel.
3.2.3 Cloth guider adjusts cloth feeding in the center to ensure proper position for sizing.
3.3 Size point device
3.3.1 STOCK Standard model. Stainless steel pneumatic blade, pneumatic weighing, squeeze,squeeze carrier, rotary screen, driving head.
3.3.2 Two groups of stainless steel outer squeezes, support roller, compression roller and opening roller.
3.3.3 Speed regulating size agitator
3.3.4 Improved size furnishing pump, speed regulating, manual and level control
3.3.5 3 sets of nickel screen, normally 17 mesh, 25 mesh and CP 66
3.4.1 Teflon conveyor for delivery and stray preventing device provide good curing effect, the matrix runs in tensionless state, thus it features heat shrinkage reduction and stable width and soft handle.
3.4.2 Direct heating by fuel, hot air circulation, temperature accuracy of hot air ±2.5°C, instrument display
3.5 Cooling and rebatcher device
Cooling part consists of three roller with water cooling.
3.6 Rebatcher part
Friction rebatching adopting Traditional method of rebatching roller linking with padding flat enables convenient operation.
3.7 Electric controller
3.7.1 This machine is driven by imported frequency conversion speed regulating motor, it features stable drive and large scope for regulating.
3.7.2 Advanced synchronized system can make the main drive of sizing match with rebatching speed, fine adjustment of tension is avaible.
(with hot oil oven)size point adhersive-bonded interlining coating machines