Introduction

Model WLM series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. Its best to be used as the floor of high buildings, and the cost of such floor is low.

Technical Parameters

Material Spec                      Galvanized steel sheet

Thickness of Coil Sheet        0.8 --1.2 mm

Main Motor Power                18.5kw

Forming Speed                    10--12m/min

Hydraulic Station Power        3kw

Quantity of Stands               About 24 groups

Hydraulic Pressure               10~12Mpa

Controlling System              PLC

Index Error of Length             10m±2mm

Total Weight                        About 1800kg

Voltage:                               380V 3 phase 60Hz or at buyers requirement

Standard Equipment of Machine

passive uncoiler                             1pcs

Guiding equipment                         1set 

Rolling forming equipment               1set

Pressing equipment                       1set

Post-cut equipment                        1set

Hydraulic station                            1pcs

PLC controlling desk                      1 pcs

Supporter table                              2 pcs

Security cover (optional)                 1set

Tile Machine,Floor Decking Machine,Roll Forming Machine