Decoiler-Straightener-Feeder-Puncher-Roll Former-Bending-Auto Cutter Line

Groovy bridge roll former  Components

(1) Un-coiler                                                1 set(2) Leveling machine                                1 set(3) Feeding device                                     1 set(4) Mechanical punching machine         1 set(5) Roll forming machine                         1 set(6) Cutting device                                       1 set(7) Run out of table                                    1 set(8) PLC control system                             1 set Roll Forming Machines'  Structure and Function:1.      Double cantilever gear drives, the producing width of  machine is adjust continually, it is possible to change the width and height.2.      Rolling stations is 20 steps ,the main machine consists of AC motor,reducer,high precision liner rail, transmission box on left and right, horizontal adjustment system and rolling moulds. The machine base and transmission adopts welding structure , with hardness treatment,  the material of roller is 45# steel.3.      The roll forming craft is made by the special Germany cold roll forming program COPRA; the craft is also made the FEA analysis and check. The structure of the rollers is combined, so the line speed difference and resisting force of roll forming is small. The sheet is easy to feed. All these assure the accuracy and stable of the roll forming.

Cable Tray Duplex Roll Forming Line