Corrugating Machine 1.Make metal corrugated tile 2.Roofing or wall tile 2.0.05mm chrome plating on roller 3.Hydraulic cutter

Corrugating Machine 1.Make metal corrugated tile 2.Roofing or wall tile 2.0.05mm chrome plating on roller 3.Hydraulic cutter

Product Features

This machine will be used for corrugating the Full-hard/CR sheared Zn plated stripUsing this machine produces materials for Roof and wall

Technical data for the corrugation below:

1.     Material: Galvanized sheet, steel sheet, PPGI sheet, tinplate, etc

2.    Thickness: 0.14mm-0.7mm

3.    Length: 762mm, 914mm, 1000mm,1250mm of which above 600m

4.    Length of Corrugation roll: Barrel length 2500-4500mm( solid or hollow)

5.    Hydraulic system power: 3KW

6.    Control and OP panel: Relay type X one(1)

7.    Up & down device for corrugation and pitch adjusting rolls:

                    Screw X four(4), adjusted by manual handles

8.    Rolling speed Max 35/min

9.    Drive:  0.6 inch chain link bearing model 6210

10.   Weight of the machine: About 8-10M.Tonnes( depend on the length)

Corrugating Machine