1. set the operating time:

   set the setting pin between the desired times to the inside or outside fo dial.

   set the setting pin to the outside fo dial:ON-state is reached at that time. If the setting pin is set to the outside continuously,ON-state continues only for NO. of setting pins X15mins.

   set the setting pin to the outside fully until a click is heard.

   If the setting pin is set to the inside ,at that time, the output is placed in OFF-state.

   when your desired time is close to the present time position.turn the minute control knob and set it apart from the position before setting.

2.Adjust the present time:

   turn the minute control knob in the center clock unit in the direction of the arrow and adjust the time.

3.set the manual switch:

   Use this switch to select either turning ON or OFF in manual or ON/OFF in the operation program.

"AUTO": output is turned ON andOFF caaording to the set program.

Manual"ON":Output is turned ON irrespective of the program.(permanent ON)

Manual"OFF":Output is turned OFF irrespective of the program.(Permanent OFF)

*After completion of test operation,set the manual switch to "AUTO".

timer time switch