1)car vacuum cleaner with car air compressor 2)ABS or PP plastic housing 3)Voltage:DC12V 4)Air flow: 20L/MIN 5)best price

Instructions for use:1, remove the product from the bag, pump nozzle alignment tire filling valve, nozzle tighten in a clockwise direction.2, insert the 12V cigarette lighter plug in the car cigarette lighter.3, switch to the "ON" position and get to work. Inflatable watch barometer pressure, the tire will be under pressure to switch to the "OFF" position.4, in a counterclockwise direction will air pump nozzle, loosen, pull the cigarette plug in from the cigarette.5, around the wire and rubber pipe well into fixed slots.Special instructions:If you are experiencing inflation will be stopped, this because your car's cigarette lighter power is insufficient, please directly from the battery connector electrical and air compressor can.

Notes: 1)· the products cannot be used in large trucks;

            2)when you use it you should start car's motor

            3) If the rapidly increasing pressure for a short time (three seconds up to 689KPa), said the air pressure is blocked, the air does not enter the tire, turn off the power, remove the gas nozzle, do it again.

            4) every 15 minutes, it is best to take a break; · only available for 12V cigarette lighter power supply input

2 in 1 tire inflators and car vacuum cleaner (JS1016)