Automatic digital Tire Inflator
E-07-OPS Main Feature:
Water Proof Model is an Option
Over Pressure Setting (OPS)
Auto-Start Inflation
102PSI/7bar/700kPa
Fully Automated, fully programmable, micro-processor controlled conversion system.
Self-diagnostic features.
Suit for: Motorcycle, Car, Light Truck *
Technical Data Summary
Dimensions(Height* Width* Depth) 290mm*230mm*120mm
11.4''*9.1''*4.7''
Net Weight 4kg/8.8lbs
Gross Weight 6.5kg/14.3lbs
Packing Size(Height* Width* Depth)170mm*500mm*290mm
6.7''*19.7''*11.4''
Power Requirement 100-240Vac 50 / 60HZ
Power Consumption 10VA
Operating Temperature Range -20/-4°F to 70 / 158°F
Max Inlet Air/Nitrogen Supply 116PSI / 8bar / 800kPa
Operating Range 5-102PSI/0.3-7bar/35-700kPa
Over Pressure Setting Range 0-29PSI/0-2.0bar/0-200kPa
Accuracy ±1PSI/0.07bar/7kPa
Resolution 1PSI/0.1bar/5kPa
Units of Measurement PSI/bar/kPa
Specifications:
1. Adjustable over pressure setting(OPS)
2. Auto-Start inflation
3. Automatic zero drift adjustment
4. Remain at last setting
5. Comprehensive diagnostics and error reporting
6. Audible and visual end of the cycle signal indicators
7. Large backlight LCD display
8. Vandal resistant mechanical switches
9. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor
10. 1 No.*10M/32.8ft standard hose with single clip-on open type chuck
11. 1400mm/55.1 grey mounting steel stand base Supplied separately
Detail Description of OPS:
Over Pressure Setting(OPS)
When fitted,the bead of the new tyre must be seated on the wheel rim.This is done via inflating the tyre past the required pressure until the bead is in place.The pressure needs to then be reduced to the required pressure.Traditionally this is done manually and is therefore time consuming for the operator.The OPS function allows the operator to set the amount of over pressure between 0 and 2 bar/29psi/200kPa.The unit will then over inflate the tyre by the set amount before automatically deflating back to the final pressure required.
Automatic Digital Tire Inflator