1.High Quality
Bar silk material transverse low power without cracks, porosity, metal or nonmetal inclusion and other visible defects
2.Feature
Categories | General Description | |
Titanium mesh plate for skull | Material | Gr2,Gr3 |
Size | δ0.5×(300-500)×(1000-2000)mm δ0.6×(300-500)×(1000-2000)mm δ1.0×(300-500)×(1000-2000)mm | |
Standard | ISO5832-2,ASTM F67 | |
Tolerance | (+/-0.03) | |
Description | Gr2 and Gr3,microstructure can reach over Level7,tensile strength can reach more than 585MPa. | |
Titanium plate for inernal bone fixation | Size | δ(1.0-6.5)×(200-500)×mm×(1000-1500)mm |
Standard | ISO5832-2,ISO5832-3,ASTM F67,ASTM F136 | |
Tolerance | δ(1.0-3.0)×(200-500)mm×(1000-1500)mm+0.1mm δ(3.0-6.5)×(200-500)mm×(1000-1500)mm+0.2mm | |
Description | Gr3,microstructure can reach over Level7,tensile strength can reach more than 585MPa.Gr5,Gr5ELI,microstructure can reache A5,tensile strength can reach more than 825MPa. | |
Titanium plate for medical equipment | Material | Gr1,Gr2,Gr3,Gr4,Gr5,Gr5ELI |
Size | δ(0.2-0.5)×600×1500 δ(0.6-0.8)×800×1200 δ(0.9-5.0)×1000×2000 δ(5.0-8.0)×1000×2000 δ(10-12)×1000×2000 | |
State | M | |
Surface | Pickling,Brightness | |
Stanard | ASTM B265,ASTM F67,ASTM F136,ISO5832-2,ISO5832-3 |
3.Mechanical Property
Designation no | Standard | Tensile Strength ó b(Mpa) | Yield Strength ó 0.2(Mpa) | Elongation δ(%) | Bend Degree |
≥ | |||||
Gr1 | 0.8~5 | 370 | 250 | 20 | 130 |
>5~10 | 370 | 250 | 20 | __ | |
Gr2 | 0.8~5 | 440 | 320 | 18 | 100 |
>5~10 | 440 | 320 | 18 | __ | |
Gr3 | 0.8~2 | 540 | 410 | 15 | 90 |
>2~5 | 540 | 410 | 15 | 80 | |
>5~10 | 540 | 410 | 15 | __ |
4.Chemical Requirements
N | C | H | Fe | O | Al | V | Pa | Mo | Ni | |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / |
Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / |
Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 |
5.Product Display
Baoji Qixin Titanium Co,. Ltd is located in "The Chinese Titanium Valley" who has specialized in Titanium Anode and Titanium Material for 10 yeas old.
ASTM F67 F136 Gr2 Titanium Mini Plates for Medical