P/N: Two pole (ON)-ON uniateral reset type toggle switch/double pole toggle switch/(on)-on toggle switchModel No.: RT-S6-24B
Rated data and performance
Rated working current | 15A,10A,6A,3A/125V,250VA(resistive load) | ||
Contact type | Contact resistance (initial value ) | Less tan 15mΩ | |
Contact material | Sliver cadmium oxide contact (if no need cadmium,[according with ROSH certificate ] can customize | ||
Electrical | Insulation resistance(initial value ) | Above 100 mΩ(use the DC500V insulation resistance test) | |
Dielectric strength | Between Non-connect terminal(initial value):1000V 50/60HZ 1 min Between non voltage metal parts and each terminal:2000V 50/60HZ 1min Between grounding and each terminal: 2000V 50HZ 1 min | ||
Mechanical | Shock resistance | In the free position | Less than 98m/s2(10G) |
In the full operating position | Less than 500m/s2(30G) | ||
Vibration resistance | 1.5mm double amplitude 10-55HZ (contact gap is under 1ms ) | ||
Capacity | Mechanical | 50,000times above (on/off frequency 20times/min) | |
Electrical (resistor load) | 25,000times above (rated load, 7times/min) | ||
Using condition | Ambient temperature/ humidity | -20~+70(with no icing ), under the 85%RH (+5~20) | |
The max on/off frequency | 30times/min |
Purpose:
Project vehicle, electric power screen controller, industry, the output controller of civilian machine and so on.
Two pole (ON)-ON uniateral reset type toggle switch (for industrial use)