1.Waterproof backer board 2. Lightweight and easy to install 3. Ideal substrate for wall-mounted toilet

Description

JIT waterproof toilet board is a prefebricated tile backer board for cladding with wall-mounted toilet/WC. The board can be tiled directly after fitting without the need for further pretreatment.

Advantages

Lightweight and easy to cut

Quick and easy to fit

Easily customisable to individual requirements with a width of 1200 mmSuitable for a wide variety of wall-mounted installationsTile straight onto the installation panel without pretreatment

Installation

Cut JIT toilet board to the required size with a utility knife. Use a jigsaw to cut out a suitable opening for the flush actuator.Using a cordless screwdriver, fasten washers to the wall carrier frame with drywall screws (at least three fastening points per side). Now attach the previously cut strips of JIT toilet board to the top and sides using adhesive sealant. Cover the joints with reinforcement tape embedded in standard thin-bed mortar or self-adhesive reinforcement tape. The installation cladding boards can be tiled directly without further pretreatment. 

   

                           Step 1                                                         Step 2

   

                           Step 3                                                          Step 4

Toilet tank backer board