Small Tungsten Carbide Blocks 1.100% virgin material 2.Various grade 3.Long service life 4.Strong hardness
Carbide blocks
Properties and applications of carbide for Plates | |||||
Grade | Density | T.R.S | Hardness | Performance & application recommended | |
g/cm³ | MPa | HRA | |||
YG4A | 14.9 | 1850 | 92 | Fine grade alloy, with good wear resistance, used for processing blades,wear resistance parts etc. | |
YG8 | 14.7 | 2400 | 89.5 | High bending strength, wear resistance lower than MK6A, used for processing blades,wear resistance parts etc. | |
YG15 | 14.5 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance parts. | |
YG20 | 13.5 | 2800 | 85.5 | High bending strength,used for step dies and other stampings dies. | |
| |||||
Type |
| unit:mm | |||
L | W |
| |||
200 | 200 | 10-45 | |||
150 | 150 |
| |||
150 | 130 | 10-45 | |||
150 | 100 | 10-45 | |||
150 | 80 | 10-45 | |||
120 | 120 | 10-45 | |||
100 | 100 | 10-50 | |||
100 | 50 | 10-50 | |||
100 | 45 | 10-50 | |||
80 | 55 | 10-50 | |||
80 | 40 | 10-40 | |||
70 | 35 | 5-40 | |||
45 | 25 | 5-20 | |||
35 | 19 | 5-20 | |||
20 | 20 | 5-20 | |||
18 | 13 | 5-20 |
Carbide block