Matsushita brand safety-oriented High dielectric strength Competitive price 2months warranty; leadtime:2days

30 AMP POWER RELAY WITH SPACE SAVING DESIGNFEATURES• Many safety-oriented characteristicsincorporatedContact gap: more than 3 mm .118 inchfor 1 Form A and 2 Form ABreakdown voltage for N.O. contact:2,000 V AC between contacts5,000 V AC between coil and contactMolded materials: all 94 V-0• Various contact arrangements1 Form A, 2 Form A, 3 Form A,2 Form A 1 Form B• High dielectric strength for transient protection10,000 V surge is ms between coil and contact• High inrush resistance 1 Form A type: 117 A (meets TV-8 requirement) 2 Form A type: 91 A (meets TV-6 requirement) VDE, TÜV also approved

TYPICAL APPLICATIONSAir conditioners, microwave ovens,  load management equipment, copiers, processcontrol equipment.

Notes:1. Coil resistance varies ±10% for less than 1,000 W, and ±15% for more than 1,000W. For each ±1°C change in ambient temperature, coil

resistance varies±0.4%.2. For each±1°C change in ambient temperature,pick-up and drop-out voltages vary approximately±0.4%.3. Pick-up and drop-out voltages are measured with the relay mounted as follows.4. The coil operating current should be pure direct current in principle. When rectified alternating current is applied to the coil, the relay characteristics (pick-up,drop-out voltage) may be changed due to the

ripple factor. Confirmation of the characteristics in the actual circuit is suggested.

JH1A-L2-DC12V