high frequency tube welder 1.Material: carbon steel 2.Diameter: 8-30mm 3.Wall thickness:0.4-1.3mm 4.Milling speed:30~90M/min

Technical data of carbon steel high frequency tube welder

Model	Tube Diameter(mm)	Wall Thickness(mm)	Welding Speed(m/min)	High frequency
CM25 tube welder	Φ8~30	Φ0.4~1.3	30~90	100Kw

Specification of tube welding machine

1. This equipment is specially used for producing Φ8-Φ30mm,δ0.4-1.3mm high-frequency straight seam welded tube and corresponding square tube and special-shaped tube(δ≤1.5mm).

2. It made by refined materials in high precision and equipped with computer fixed length cutting saw.

3. The main machine including forming, welding cooling sizing and straightening device answer the use one installation bed.

4. The composition of equipment is from uncoiler to computer fixed length-cutting saw.

5. Rolling speed can be adjusted correspondingly within suitable range of tube diameter and wall thickness.

Production flow of tube welding machine:

Raw material (steel coil) →uncoiling →shearing and butt-welding →material accumulating→ non-power leveling →mill-forming →high-frequency welding →removing burrs outside of weld seam →cooling →sizing →roughly straightening →fixed length cutting →finished tube →run-out table

In order to offer you right welded tube mill, we have to know details as follows:

1. The material of tubes

2. The diameter range of tubes

3. The wall thickness range of tubes

Workshop

CM series carbon steel high frequency tube welder