korea welding 1.Weld PP, PE pipe or fittings 2.Size from 250 to 500 mm 3.One year quality warranty

SKCHC500

Controller  Specification 

Input Voltage    AC170 to 250V

Storage Temperature  -10~70°C

Operating Temperature   0°C to 60°C

Maximum Pressure    0 to 150kgf/cm²

Dimension   480(W)*345(D)*592(H)

Weight  49KG

Power consumed   10KW

Fusion data storage    200 Times

Setting Range   ISO225to 630

                       JIS 200 to 600

Setting Range     ASTM8 to 24 IPS

 BODY/HEATER/TRIMMER SPECIFICATION

Storage Temperature   -10~70°C

Operating Temperature     -5°C to 60°C

Maximum Pressure     0 to 150kgf/cm²

Dimension  958(W)*744(D)*756(H)

Clamp Weight  146KG

Heater Weight   26KG

Trimmer Weight 65KG

Power consumed Heater    AC220V 4.6W

Power consumed Trimmer   AC220V  2.5KW

Fusion Range     ISO250 to 500

Fusion Range (option)      JIS250 to 500

                                      ASTM10  to 20IPS

 controller

FEATURE:

This was designed so that even beginners may use easily. Depending on site, site name is automatically changed and stored (up to 10 site names). Inputting site unique name can continuously connect fusion number and perform work even when moving from site to site. You can see fusion content using view function without printing. (Black mark at abnormal part) Outside temperature is measured and cooling time is automatically corrected (shortened up to a maximum of 20%). It is possible to see screen with back light function during night work. It is possible to see work content in advance by using view item before printing. The built-in printer makes it easy to replace paper and then makes output easily and quickly. Internal printer is installed, which prints quickly as 60 seconds during 40 point output This is a product authorized for fuser performance check by Korea Gas Safety Corporation.

Caution for Handling

Input power cable shall be 5.5mm2 or more, and be as short as possible from input side(power generator). Use the grounded power. Combine heater connector before turning on power. When a message "combine coupling" appears about 5 seconds after turning on controller switch, remove foreign materials attached to coupling at this time and then combine coupling. Oil sensor is installed inside oil tank, and alarm message is displayed if oil is deficient, so at this time, fill oil(alarm message disappears). For oil, use #32 hydraulic oil during winter and #46 hydraulic oil during summer.

Specition

-Selding-225A/315ASelding-400ASelding-500A/630AInput VoltageStorageTemperatureOperatingTemperatureMaximumPressureDimensionWeightPower consumed(Heater,Trimmer Included)Fusion data storageSetting Range

AC170 to 250V
-10 to 70°C
0 to 60°C
0 to 150Kgf/cm2
480(W)X325(D)X437(H)		480(W)X345(D)X592(H)
32Kg		49Kg
5Kw	7Kw	10Kw
200 Times
ISO 50-315JIS 50-300	ISO 180-400JIS 200-400	ISO 180-630JIS 200-600

Operation

SKCHC500 automatic pipe welding machine korea welding